H2D
Dual nozzle at 350 °C and heated chamber at 65 °C
1/9Choose your version
Bambu Lab builds each model in several versions. This is the one we stock and what we bring to order.
Official name: H2D AMS Combo / Standard
- H2D dual nozzle printer
- One AMS 2 Pro for four materials, with drying
- Stock plates, nozzles and accessories
Official name: H2D AMS Combo / Dual AMS 2 Pro Bundle
- H2D printer
- Two AMS 2 Pro units: eight materials online
Official name: H2D AMS Combo / AMS HT bundle
- H2D printer
- AMS HT for high temperature materials, drying at 85 °C
Official name: H2D Laser Full Combo / 10W
- H2D with 455 nm blue diode laser module, 10 W ±1 W
- AMS 2 Pro
- Laser plates, Birds Eye camera and emergency stop
Official name: H2D Laser Full Combo / 40W
- H2D with 455 nm blue diode laser module, 40 W ±2 W
- AMS 2 Pro
- Laser plates, Birds Eye camera and emergency stop
Official name: H2D / standard
- H2D printer without AMS
- AMS can be added later
Personal manufacturing hub: dual hotend FDM printer with a heated chamber, and with the optional modules it engraves and cuts with a laser, cuts with a blade and draws with a pen. For production workshops and large technical parts with two materials, dedicated support or carbon fiber.
- Dual hotend with contactless offset calibration: dedicated support in one nozzle and flexible + rigid in the same part.
- 350 °C hotend, active chamber at 65 °C and hardened steel extruder for nylon and carbon fiber.
- 600 mm/s sustained with the high flow hotend: the same car comes out in 17 h 16 min versus 26 h 29 min on the X1C.
- Volume up to 350 × 320 × 325 mm in dual combined mode.
- 455 nm laser: 10 W cuts 5 mm plywood and 40 W cuts 15 mm; plus blade cutting and pen drawing.
- 4 cameras and 36 sensors; 15 sensors on the filament path alone.
- Flame sensor, flame retardant chamber, emergency stop and optional CO2 extinguisher.
- Runs 100 % without internet: control, files and firmware over LAN or USB.
Official Bambu Lab video
Meet the H2D
Specifications
Printing
| Single nozzle volume | 325 × 320 × 325 mm |
|---|---|
| Dual overlapped volume | 300 × 320 × 325 mm (the web spec sheet lists 300 × 320 × 320 mm) |
| Dual combined volume | 350 × 320 × 325 mm |
| Maximum speed | 1,000 mm/s; 600 mm/s sustained with the high flow hotend |
| Acceleration | 20,000 mm/s² |
| Maximum volumetric flow | 40 mm³/s; 65 mm³/s with the high flow hotend |
| Colors | up to 24 with 4 AMS 2 Pro and 8 AMS HT and hubs |
Toolhead and extrusion
| Hotends | two, hardened steel, up to 350 °C |
|---|---|
| Hotend swap | with a clip, no tools and no cables to unplug |
| Extruder | DynaSense PMSM servo, 20 kHz sampling, hardened steel gears |
| Dual nozzle calibration | contactless by eddy current, before every print |
| Filament sensors | 15 along the path from AMS to nozzle, tracking 5 parameters |
| Nozzle camera | macro with AI: buildup, printing in mid air and spaghetti |
Chamber and structure
| Structure | enclosed CoreXY, die cast aluminum chassis, linear rail on X |
|---|---|
| Heated bed | up to 120 °C |
| Chamber heating | active at 65 °C, PTC heater (FAC118 on 110 V, FAC119 on 220 V) |
| Filter | G3 + HEPA H12 + activated carbon; Adaptive Airflow with three dampers |
| Feet | floating with tuned damping |
| Safety | emergency stop button, flame sensor, flame retardant chamber, door sensor; optional CO2 extinguisher |
Electronics and connectivity
| Cameras | 4 computer vision cameras (Live View, Birds Eye, toolhead, nozzle) |
|---|---|
| Sensors | 36 sensors and 2 servos |
| Screen | touch (DIS007) |
| Connectivity | Wi-Fi, cloud, fully offline mode over LAN or USB, Developer Mode with MQTT |
| Software | Bambu Studio (FDM) and Bambu Suite (laser, blade, pen) |
Laser and cutting (laser edition)
| Laser | 455 nm, 10 W or 40 W |
|---|---|
| Wood cutting | 5 mm plywood with 10 W; 15 mm with 40 W |
| Blade cutting area | 300 × 285 mm; drawing 300 × 255 mm |
| Extras | Air Assist with built in pump, contactless 3D mesh, optional rotary attachment and air purifier |
Compatibility
AMS
AMS 2 Pro and AMS HT: up to 4 AMS 2 Pro + 8 AMS HT with hubs (25 colors). Compatible with first generation AMS without the drying function. Does not use AMS lite. Buffer SA009.
Build plates
- Textured PEI Plate FAP025
- Smooth PEI Plate FAP026
- Engineering Plate FAP038
- Cool Plate SuperTack FAP040
- Cutting platform FAP029, StrongGrip FAP027 and LightGrip FAP028 mats, laser base FAP030, Vision Encoder FAP031
Hotends and nozzles
- FAH023 / FAH060 hardened steel 0.4 mm (stock)
- FAH024 / FAH061 hardened steel 0.6 mm
- FAH025 / FAH062 hardened steel 0.8 mm
- FAH026 / FAH059 stainless steel 0.2 mm
- FAH030, FAH031, FAH032 (and FAH063 to FAH065) high flow 0.4 / 0.6 / 0.8 mm
- FAH039 to FAH045 tungsten carbide (standard and high flow)
- FAH068 / FAH069 high flow TPU hotend 0.4 / 0.6 mm (H2D only)
Materials
Prints
- PLA
- PETG
- TPU (with the high flow TPU hotend or an external spool)
- ABS
- ASA
- PC
- PA-CF, PAHT-CF, PA6-CF and PET-CF
- ABS-GF and PA6-GF
- Soluble and dedicated supports in the second nozzle
With care
- PPS-CF and PPA-CF: do not run through the AMS, use an external spool
- Nylon and PC: dry first (AMS HT dries at 85 °C)
Not recommended
- Nothing in the Bambu Lab range is ruled out by temperature: the hotend reaches 350 °C
Versus its siblings
| H2S | The H2S is single hotend, has no side windows, laser only at 10 W and a 340 × 320 × 340 mm volume. |
|---|---|
| X1C | The same car model takes 17 h 16 min on the H2D and 26 h 29 min on the X1C. The H2D adds a dual nozzle, 350 °C, active chamber at 65 °C, linear rail on X and a HEPA filter. |
| X2D | The X2D has a Bowden auxiliary nozzle and mechanical switching, without the H series price barrier; the H2D uses two direct drive extruders and reaches 350 °C versus 300 °C. |
| H2C | The H2C swaps the right hotend for an induction hotend with an automatic swap rack. |
In the box
- Variants: H2D (no AMS), H2D AMS Combo (with AMS 2 Pro), H2D Laser Full Combo 10 W and 40 W (with laser module, platforms, Birds Eye camera and emergency stop). The AMS HT is sold separately.
Good to know
- The 350 × 320 × 325 mm volume only applies in dual combined mode; with one nozzle it is 325 × 320 × 325 mm.
- Laser safety windows come standard only on the laser edition.
- CO2 extinguisher, air purifier and rotary attachment are optional.
- Foreign object detection has a diagonal blind zone and side strips of about 6 cm with no coverage.
- Version without laser: no air pump.
- Does not use AMS lite.
Frequently asked questions
How big can it print?
325 × 320 × 325 mm with one nozzle; 350 × 320 × 325 mm in dual combined mode; 300 × 320 × 325 mm in dual overlapped mode.
What does the laser cut?
5 mm plywood with 10 W and 15 mm with 40 W. The laser only comes in the Laser Full Combo versions.
Does it need internet?
No. It can run fully offline over LAN or USB, and it has a Developer Mode with MQTT.
Which AMS works with it?
AMS 2 Pro and AMS HT, up to 4 + 8 with hubs (25 colors). The first generation AMS works without drying. The AMS lite does not.
Can I use filament from other brands?
Yes. The printer and the AMS accept third-party spools. RFID reading and remaining filament estimation only work with Bambu Lab spools. A Bambu spool measures 200 mm in diameter, 55 mm core and 67 mm wide; a spool from another brand must fit those dimensions to go inside the AMS.
What warranty does NODEM give?
NODEM gives a 30 day warranty and records the serial number of the unit at the time of sale. That serial number identifies the machine to the service workshop and to Bambu Lab.
Can I get spare parts?
Yes. Every part has an official Bambu Lab SKU code and NODEM orders it by that code. The NODEM service guide lists the frequent cases and the spare parts for this model.
Warranty and service
Bambu Lab factory warranty: we review each case and handle it as an authorized distributor. We give a 30-day warranty for factory defects from the sale, with the serial number on the invoice.
Original parts by official part number and our own workshop in Maracaibo.
Talk on WhatsApp